toplineimage
Construction Documents


MPE prepares a full range of construction documents (plans, specs, estimates, reports, etc.) utilizing state of the art CAD software.

MP Engineers was retained to design a load transfer and a jacking procedure for seven structural load-bearing columns (four concrete and three brick), and parts of a load bearing basement wall in a multi-story apartment ...

This project involved the in-depth inspection and structural rehabilitation of the existing elevated pool deck surrounding the Borough of Manhattan Community College (BMCC) pool, as well as the repair and ...

The project involved the in-depth inspection, repair recommendation & prioritization, and a development of Contract Documents (PS&E) for the component repair of the following four bridges in Queens County, NY: ...

MP Engineers, P.C. provided Construction Support Services for the General Contractor on this multi-million dollar new construction school project. The project involved a construction of a 4 story building. The building i...

This project involved inspections and design of recommended measures for nine bridges at various locations in the five boroughs of New York City. MP Engineers was responsible for performing a full in-depth inspection of ...

MP Engineers, P.C. provided architectural and engineering design services for a replacement of an existing stone ballasted EPDM roof on three commercial buildings. New roofing for the three buildings of approximately 15,...

Doles Recreation Center is a community center owned by the City of Mt. Vernon. The property sits at the south end of the block bounded by South 6th Ave., South 7th Ave., West 3rd St., and West 4th St., and faces east tow...

This project involved replacing deteriorated concrete bridge deck slabs including some stringers and diaphragms, repairing deck spalls, repairing and reconstructing deck joints, repairing headers, removing asphalt sur...

Hunter College is a comprehensive teaching, research and service institution, long committed to excellence and access in education of students in liberal arts and sciences, as well as in education, health sciences, nursi...

The project involves A/E services for the renovation of the existing Toll Plaza building, structural inspection of the existing toll plaza canopy, and construction of new ITC Building and a new steel canopy for added E-Z...

MP Engineers was responsible for an inspection, design, construction plans, specifications, cost estimates, and construction support services for two bridge superstructure replacements on the Garden State Parkway. The im...

This project involved an inspection, preparation of a condition assessment report, and design of identified remedial measures for pavers, sidewalks and small retaining walls in front of Martin Luther King Jr. Courthouse....

This design/build project involved a construction of a new Metro-North Station at Yankee Stadium. The project included new platforms, a pedestrian bridge, stairs and mezzanines on either side of the bridge, and elevators...

This project involved an inspection and development of specific details regarding the site’s reconstruction, area of site disturbances, and proposed landscaping at the Civil Branch of the New York Supreme Court in ...

PERI Formwork Systems is one of the largest providers and manufacturers of standardized formwork and scaffolding systems in the world. Their main production plant is in Weissenhorn, Germany. PERI’s large world-w...

MP Engineers, P.C. is managing PS 314Q‘s construction and performing all construction administrative duties, including monitoring of the construction, negotiating change orders, and reviewing sub-contractor bids...

This project involved an inspection and final design (Phases V-VI) of recommended rehabilitative measures of six bridges in Nassau and Suffolk Counties in New York State. Three of the bridges were concrete rigid frame ar...

Under this project, the Port Authority of New York and New Jersey proposed to repair and rehabilitate the GW Bridge approaches and sidewalks in the main span.    MP Engineers, P.C. inspected the NJ Approa...

This project involved a complete replacement of signing and lighting systems (including all under deck lighting) along the entire Cross Bronx Expressway (CBE) corridor. The CBE is approximately an 11 mile 6 lane (3 lanes...

MP Engineers’ (MPE) responsibilities for this project included preparation of all required MPT drawings, including general notes as required to support the Client’s permit applications for a construction of d...

The work on this $3.5 million project included abutment repairs at backwall and wingwall locations, as well as drainage improvements,  new tooth-dam expansion joints, aesthetic enhancement of Pier 2 so its appear...

toplineimage
toplineimage
Services


Architectural Design

Architecture, Masonry

Building Design

Condition Inspection of Buildings

Construction Documents

Construction Inspection

Construction Management

Construction Support Services

Cost Estimating

Deck Repairs Inspection

Design Build

Design Review

Drainage Design

Ecological

Electrical Design

Engineering Support

Facility Inspection

Highway Design

Inspection of Bridge Safety Elements

Inspection of Bridge Structural Elements

Inspections as per NBIS Standards

Load Rating

Load Transfer, Temporary Support Design

Mechanical Design

MPT Drawings

Permitting and Approvals

Plumbing Design

Retaining Wall Design

Roof Investigation, Repair Design

Sign Structure Inspection

Special Inspections

Structural Integrity Inspections

Structural Investigation

Structural Steel Design

Structural Steel Repair

Traffic Control Monitoring

toplineimage